More actions
| System Specifications |
|---|
| FACP: Edwards EST3 FACP Location: Multiple System Type: Two-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 70VRMS (audible) 24VDC (visual) System Coding: Unknown Strobes Synchronized: Yes, EST Date of last known Upgrade: 2006 Year Opened: 1961 |
Leduc Community Hospital is a hospital located at 4210 48 St, Leduc, Alberta. It is owned and operated by Alberta Health Services. The hospital was originally built in 1961, and was expanded and renovated in 1985. The fire alarm system was upgraded in 2006.
System Specifications (2006-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by an Edwards EST3 addressable fire alarm system. There are multiple nodes as part of a network, one panel is located in the security office. The system runs EST’s Signature addressable protocol, and is equipped with voice-evacuation. The system is configured for two-stage operation, however the tones are unknown at this time. Live “Code Red” announcements are made by security during an alarm.
Annunciators[edit | edit source]
There are Edwards EST3-LCDANN annunciators at all nurses’ stations. There is also a full active graphic annunciator.
Notification Appliances[edit | edit source]
All audible notification appliances are Atlas Sound VTF-17UCR re-entrant speakers (red, flush-mount, 70V), installed in the 1985 renovation.
Certain areas have Edwards “Genesis” GCRF-VM remote strobes (red, ceiling-mount, FIRE marking, set to 30cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are EST SIGA-270P addressable two-stage pull stations.
Automatic Detection Devices[edit | edit source]
There are EST SIGA-PS addressable photoelectric smoke detectors throughout the hospital’s common areas and patient rooms.
There are EST SIGA-HRS addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas.
All detectors are mounted on EST SIGA-SB bases.
Modules[edit | edit source]
There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are EST SIGA-CR addressable relay modules serving various purposes.
EOLs[edit | edit source]
There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.