Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Hotel Blackfoot

From FireAlarmPedia
System Specifications
FACP: Vigilant VM-1?
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2015-16
Year Opened: 1973

Hotel Blackfoot is a hotel located at 5940 Blackfoot Trail SE, in Calgary, Alberta, Canada. The hotel was built in 1973, and the fire alarm system was upgraded between 2015 and 2016.

System Specifications (2015/2016-present)[edit | edit source]

Please note that some system specifications are unconfirmed. This page should not be used for official purposes.

FACP[edit | edit source]

The building is protected by a Vigilant VM-1 addressable fire alarm system. The panel location is unknown. The system runs Vigilant’s GSA addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Vigilant RLCD annunciator paired with a Vigilant RLED24 annunciator behind the front desk.
Both annunciators are mounted in a Vigilant RA-ENC2 enclosure.

Notification Appliances[edit | edit source]

All notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Vigilant V-PS addressable photoelectric smoke detectors in all hotel corridors.

Modules[edit | edit source]

There are Vigilant GSA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Vigilant GSA-CR addressable relay modules serving various purposes.
There are Vigilant GSA-IM addressable isolator modules on the SLC.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.