More actions
| System Specifications |
|---|
| FACP: Vigilant VM-1? FACP Location: Unknown System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, Genesis Date of last known Upgrade: 2015-16 Year Opened: 1973 |
Hotel Blackfoot is a hotel located at 5940 Blackfoot Trail SE, in Calgary, Alberta, Canada. The hotel was built in 1973, and the fire alarm system was upgraded between 2015 and 2016.
System Specifications (2015/2016-present)[edit | edit source]
Please note that some system specifications are unconfirmed. This page should not be used for official purposes.
FACP[edit | edit source]
The building is protected by a Vigilant VM-1 addressable fire alarm system. The panel location is unknown. The system runs Vigilant’s GSA addressable protocol, and the system coding is temporal.
Annunciators[edit | edit source]
There is a Vigilant RLCD annunciator paired with a Vigilant RLED24 annunciator behind the front desk.
Both annunciators are mounted in a Vigilant RA-ENC2 enclosure.
Notification Appliances[edit | edit source]
All notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are EST SIGA-270 addressable single-action pull stations.
Automatic Detection Devices[edit | edit source]
There are Vigilant V-PS addressable photoelectric smoke detectors in all hotel corridors.
Modules[edit | edit source]
There are Vigilant GSA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Vigilant GSA-CR addressable relay modules serving various purposes.
There are Vigilant GSA-IM addressable isolator modules on the SLC.
EOLs[edit | edit source]
There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.