Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Pineridge Apartments

From FireAlarmPedia
System Specifications
FACP: Kidde VS4
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: N/A
Date of last known Upgrade: 2021
Year Opened: 1981

Pineridge Apartments is an apartment complex located at 433 Pinestream Place NE, in Calgary, Alberta, Canada. The complex is owned and managed by Boardwalk Residential. The building was built in 1981, and the panel was upgraded in 2021. Additionally, devices have been replaced as deficiencies occur.

System Specifications (2021-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Kidde VS4 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is continuous.

Notification Appliances[edit | edit source]

Most notification appliances are Edwards “Durabel” 6100D vibrating bells (10” gong).
Deficiency replacements include a Mircom BL-6 motor bell (6” gong) in the lobby, a Mircom BL-6A motor bell (6” gong) in the second floor hallway, and a Mircom BL-6B motor bell (6” gong) in the fourth floor hallway.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Most pull stations are Mircom MS-401 conventional single-action pull stations.
Some areas have Edwards 275-C111 conventional single-action pull stations, which replaced recalled Edwards pull stations.
Other areas have Tyco/Grinnell MS-401GR conventional single-action pull stations as deficiency replacements.

Automatic Detection Devices[edit | edit source]

There are FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors in the entryway of all suites, and in common area closets and mechanical/electrical rooms.
Some units have System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors as deficiency replacements.
One unit has a Potter CR-135W conventional 135°F fixed-temperature/rate-of-rise heat detector as a deficiency replacement.
All common areas have System Sensor C2W-BA conventional photoelectric smoke detectors.
Some laundry rooms have Edwards 245A conventional 135°F fixed-temperature heat detectors.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all circuits.

Permit Information[edit | edit source]

Permit issued on 2021-08-17. Project scope was Fire Alarm Panel Replacement.
Source: City of Calgary MyProperty