Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Pratts Food Service Alberta

From FireAlarmPedia
System Specifications
FACP: EST iO500
FACP Location: Main Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: N/A
Year Opened: 2012

Pratts Food Service is a Winnipeg-based food distribution company. This page will cover the Alberta warehouse, located at 291196 Wagon Wheel Road, in Rocky View, Alberta, Canada. The warehouse was built in 2012, and was expanded in the late 2010s. The fire alarm system is original to each area.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by an EST iO500 addressable fire alarm system. The panel is located in the main electrical room. The system runs EST’s Signature addressable protocol, and the system coding is temporal.

Booster Panels[edit | edit source]

There is an Edwards BPS6C booster power supply in the expansion electrical room.

Notification Appliances[edit | edit source]

Most notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).
The expansion loading dock has Edwards G1AVRF horn/strobes (red, wall-mount, FIRE marking, set to 15cd).
One area has Edwards GCAVWF horn/strobes (white, ceiling-mount, FIRE marking, set to 15cd).
The freezer has Edwards WG4RF-HVMC weatherproof horn/strobes (red, wall-mount, FIRE marking).
For outdoor notification, there is an Edwards “Integrity” 757-5A-T horn/strobe (red, wall-mount, 15cd) outside the main electrical room.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Most pull stations are EST SIGA-270 addressable single-action pull stations.
The freezer has Edwards 270-SPOW conventional single-action pull stations, wired to EST SIGA-CT1 addressable monitor modules. The modules are located in the expansion electrical room.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors at the top of each stairwell.
Most are mounted on EST SIGA-SB bases; one is mounted on an EST SIGA-IB isolator base.

Modules[edit | edit source]

There are EST SIGA-CT2 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are EST SIGA-CT1 addressable monitor modules supervising the kitchen suppression system.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all circuits supervised by monitor modules, and all signal circuits.