Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Canada Diagnostic Centres (Leduc)

From FireAlarmPedia
Revision as of 20:53, 2 September 2024 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FX-2000 <br />FACP Location: Unknown <br />System Type: Single-Stage Addressab...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Unknown
Date of last known Upgrade: 2023
Year Opened: 1976, 2023

Canada Diagnostic Centres is a Canadian chain of radiology clinics. This particular clinic is located inside the City Centre Mall (Leduc) at #1 5201 50 Street, in Leduc, Alberta, Canada. The building was built in 1976, and the clinic opened in 2023. The fire alarm system was installed in 2023.

System Specifications (2023-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel location is unknown. The system runs Mircom’s Advanced addressable protocol, and the system coding is temporal.
This system is tied to the main mall system, and will initiate an alarm on that system when activated.

Notification Appliances[edit | edit source]

All notification appliances are Mircom FHS-400C-RR horn/strobes (red, ceiling-mount, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AP addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are System Sensor M500XA isolator modules on the SLC.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.